6v Platinum sealed AGM battery PLA-T105AGM, 220ah
Manufactured by Platinum, as an afordable model of the Trojan T105
Consumer and trade recognised brand
6 Volt (220ah @ 20hr rate - 180ah @ 5hr rate)
26 kg - 264mm length x 181mm wide x 276mm high
Terminals available as M8 stud LPT
|Capacity (C5)||185 Ah|
|Capacity (C10)||207 Ah|
|Capacity (C20)||225 Ah|
|Capacity (C100)||250 Ah|
|Height inc. terms||281 mm|
This product has Cheaper Delivery to Business addresses.
315W JA BiFacial Solar Panels - 60 cell
These panels have a glass back sheet so they absorb sun which bounces back from behind the panel. Great for low light and cloudy conditions. These are ideally suited to boats with a white roof as you can see gains of upto 26% from the reflection of light back from the white surface making the panel 391W. Any surface will work, but white gives you the best refraction of light back to the panel, or you can add aluminium solar reflective paint on the roof under the panel to get the best gain.
If using this panel with MPPT you should calculate this panel as 400W so that you do no overload the MPPT. Tracer MPPT's have current limiting so it doesn't matter if you go over the rated amps, but Outback will be damaged by too much power.
JA bifacial modules are assembled by high-performance PERCIUM cells and encapsulated by glass-glass panels, are capable of converting energy from incident lights on front and diffuse light, as well as reflected and scattered light on rear sides, which make them better reliability, superior low irradiance performance, and excellent energy generation performance. Framed structure is benefit to module packaging transportation and installation, higher tolerance for harsh environment and extreme weather conditions.
Alpha & OutBack Energy’s SPC III is third generation off-grid inverter with rich new functions. Its detachable LCD control module can be turned to remote panel. It’s also integrated with Bluetooth interface ready for mobile monitoring and supports USB on-the-go function to facilitate data upload/ download. Battery independency design enhances this inverter to operate without battery connected.
Note: This unit requires a minium of 5 Solar Panels in series to function (we advise 6-8 depeding on panel)
|SPC III Off-Grid Inverter Models|
|Model||SPC III 1500-24||SPC III 3000-24||SPC III 5000-48|
|Selectable Voltage Range||90-280VAC|
|Frequency Range||50/60Hz (autosensing)|
|AC Voltage Regulation (Batt. Mode)||230VAC ± 5%|
|Efficiency (Peak)||90 - 93%|
|Transfer Time||15 ms|
|Waveform||Pure Sine Wave|
|Floating Charge Voltage||27VDC||54VDC|
|Custom Voltage Range||25-31.5VDC||48-61VDC|
|SOLAR CHARGER & AC CHARGER|
|Solar Charger Type||MPPT|
|Maximum PV Array Power||2000W||4000W|
|MPP Range @ Operating Voltage||120 - 380 VDC||120 - 450 VDC|
|Maximum PV Array Open
|400 VDC||500 VDC|
|Maximum Solar Charge Current||60A||80A|
|Maximum AC Charge Current||40A||60A|
|Maximum Charge Current||60A||80A|
|Dimension (D x W x H) mm||100 x 280 x 390||115 x 300 x 400|
|Net weight kg||8,5||9||10|
|Communication Interface||USB / RS232 / RS485 / Bluetooth / Dry Contact|
|Humidity||5% to 95% Relative Humidity (Non-condensing)|
|Operating Temperature||-10°C to 50°C|
|Storage Temperature||- 15°C to 60°C|
Warranty: 2 years
Note: These are a high frequency type inverter unlike the low frequency outback VFXR range.
35mm Cable - Use for connecting Batteries to Inverter
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
Battery Inter-connecting Cable - 35mm cable with M8 - M8 Lugs (M8 on both ends)
Made up to size for you for connecting your batteries together.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
10mm cable - Charge Controller to Batteries - 2 Meter with M8 Lug
You will need 2 cables per charge controler (Pos & Neg). The Lugs are on 1 end only as the charge controllers have bare wire connectors.
If you need longer please let us know
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: