At the same physical size as a 250W panel, the Q CELLS 305W Mono with Black Frame is a perfect high output module for roofs where space is limited and is available now at a very cost effective price.

The new high-performance module Q.PEAK-G4.1 is the ideal solution for residential buildings thanks to its innovative cell technology Q.ANTUM. The world-record cell design was developed to achieve the best  performance under real conditions – even with low radiation intensity and on clear, hot summer days.

Specifications:

Peak power Wp 305W
Voltage at peak power Vmp: 32.62V
Max open circuit voltage Voc: 40.05V
Current at peak power Imp: 9.35A
Max short circuit current Isc: 9.84A
Weight: 18.8kg
Frame: Black Aluminium
Dimensions: 1670 x 1000 x 32mm
Warranty on output: 25 years
Product warranty: 12 years

Download Full Spec Sheet

iTracer is an industrial grade product with advanced Maximum Power Point Tracking (MPPT) algorithm. It can deliver the maximum available power for charging batteries and charge a lower nominal voltage battery from a higher nominal voltage array.

No Fan for slient Operation

Features：
• Advanced MPPT algorithm with the max. tracking efficiency of 99%
• Multi-phase synchronous rectification technology realizing peak conversion efficiency 98%
• Dual-core(ARM CPU+DSP) control architecture improves the system response speed and optimizes the performance of the system
• Multiphase control technology, optimizes charging current smoothness, reduces ripple and improves the system efficiency
• 128*64 dot-matrix LCD intuitively displays data and state, 6 buttons combinations for easy operation
• Four battery type options: Sealed, Gel, Flooded and User-defined
• Energy statistics recording, it is convenient for users to view charging and discharging energy of each day, month, year and total value.
• Diversified load control mode
• Programmable battery management parameters
• Built-in running data and event logging, max. 15 months
• Extensive communication capabilities (RS232,RS485 with Modbus protocol, CAN Bus extendable)
• PC software available for real time monitoring and parameter setting
• Field upgradable firmware

Electronic Protections:
• PV short circuit  protection
• PV overvoltage protection
• PV over current protection
• PV reverse polarity protection
• Reverse current protection at night
• Over temperature protection
• Battery reverse polarity protection
• Load overload protection
• Load short circuit protection

 

Model	IT3415ND	IT4415ND	IT6415ND
Rated system voltage	12V/24V /36V/48V auto work
Rated battery current	30A	45A	60A
Rated load current	30A	45A	60A
Max. PV open circuit voltage	150V
Voltage range	8~72V
Max.PV input power	400W  (12V)	600W  (12V)	800W  (12V)
	800W  (24V)	1200W  (24V)	1600W  (24V)
	1200W  (36V)	1800W  (36V)	2400W  (36V)
	1600W  (48V)	2400W  (48V)	3200W  (48V)
Self-consumption	1.4～2.2W
Equalize charging voltage	Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V
Boost charging voltage	Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V
Float charging voltage	Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V
Low voltage reconnect voltage	Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V
Low voltage disconnect voltage	Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V
Grounding	Common negative
Tracking efficiency	99%
Peak conversion efficiency	98%
Dimension	358x219x102mm	382x231x107mm	440x231x110mm
Terminal	25mm2	35mm2	35mm2
Net Weight	3.7kg	4.6kg	5.9kg
Working temperature	-25℃～+55℃
Storage temperature range	-30℃～+85℃
Humidity	95% NC
Enclosure	IP20

Download Datasheet

Pure sinewave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. Models range from 150VA to 3000VA per module.

• Low voltage alarm trip and reset levels
• Low voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 - 245V
• Frequency 50Hz or 60Hz
• ECO mode on/off and ECO mode sense level
   

VE.Direct allows use with VE.Direct Bluetooth adaptor to control the inverter via your phone or laptop.

Spec Sheet

Download Full Spec Sheet

6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable

Max load: 50A

Set of 4 Aluminium mounting brackets for mounting solar panels on vans, boats, sheds or a wooden frame as a easy cheap solar framing system.

** Panels larger than 100w are not recommended to use these alone, as a direct fixing to a vehicle roof.  We suggest a bespoke solution using bolts, some of our customers use these brackets and modify them to achieve this, others get a locally fabricated solution **

Includes:
Aluminium mounting brackets;
Wood screws:St5.7 mm*30mm,
Socket Head Screw:M6*25mm,

Battery Inter-connecting Cable - 35mm cable with M8 - M8 Lugs (M8 on both ends)

Made up to size for you for connecting your batteries together.

Battery Inter-connecting Cable - 35mm cable with M10 - M10 Lugs (M10 on both ends)

Made up to size for you for connecting your batteries together.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

MC4 Solar Connector - Price is per pair simply select the quantity as the number of pairs you want.

These are the standard connectors used on most solar panels.

TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service.
The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service.
Build in press tabs for easy disconnect, no tool is needed. 25A max load.
Wires should be crimped or soldered into the pins and care should be taken to get the correct pin into the correct connector. Once the pin is pushed into the connector it is difficult to remove without the correct tooling.
 
Main Technical Specification:
Maximum Current: 25A
Maximum voltage: 1000V
Contact resistance:≤5mmΩ
Maximum operating humidity: 5% -95% (No condensation)
Temperature: -40 ℃ ~ +90 ℃
Waterproof Grade: IP67
Flame class: UL94-V0
Connecting cable specifications: 2.5mm2 4mm2 6mm2
Test voltage: 6.6KV (50Hz, 1min)
Metal materials: nickel copper
Insulation material: PA12 * 1988HB
Lock mode: Self-locking
Security Level: Class ‖
Insertion force:≤50N
Withdrawal force:≥50N
 
Features:
Shell has a strong anti-aging, anti- UV capability; found in outdoor use under harsh environment requirements; according to different needs can be arbitrary and used in conjunction with a variety of cell junction box; all connections are using press-fit connection;

Simple DIN mount rail 10cm long for DC or AC DIN mount breakers.  Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it.  Quick easy and simple solution to install breakers to your solar system.

Use with our:

• DC DIN mount breakers
• RCBO AC breakers.