A complete kit as a cheap solar fridge option, including solar panel, battery and inverter
Victron pure sinewave output, high peak power and high efficiency in a compact unit. Models range from 250VA to 1200VA with UK socket - other socket outlets available on request
These inverters allow you to power domestic equipment - requiring 230VAC - using 'leisure' or 'automotive' batteries rated at 12V
Bulit in DC fuse in all models but not replaceable in all models - see the manual for further details on which models carry the replaceable fuse.
Consider adding a battery isolator switch https://www.bimblesolar.com/300a-blue-sea-battery-isolator
VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level Monitoring:
• In- and output voltage, % load and alarms
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector
See the Download tab on this listin
This is a Top loading Chest Freezer which has a clever fridge mode so you can use as a solar fridge (without having to do the modification in our guide)
It runs on 230V AC so you need to run from your inverter. Its a super affordable and easy plug and play solution for a solar fridge.
The advantage of using a freezer is the insulation layer is much greater and top loading means that the cold doesn’t fall out every time you open it. They also tend to have a larger compressor so will have to run for less time to get the amount of cold you want.
|Dimensions||(H)86.0 x (W)52.7 x (D)56.9|
|Freezer Capacity (Net)||100 Litres|
|Freezer Star Rating||4|
|Frost Free Freezer||No|
|Manufacturer Warranty||1 Year|
|Manufacturer Warranty Domestic Use Only||Yes|
|Noise Level||41 dB|
|Number of Compartments (Freezer)||1|
|Open Door Alert||No|
|Required Room Temperature||10 to 43 °C|
|Temperature Warning Light||Yes|
|Annual Energy Consumption||171 Kwh|
Rating 75W (allow for start up surge when chosing an inverter)
High Efficiency Poly PERC Half-Cell Module (CS3K-285-290-295-305P) Dimensions: 1675 × 992 × 40mm
CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.
With proprietary poly wafer and cell technologies Canadian Solar have developed an extraordinary module range. HiKu are the first poly PERC modules with up to 335W output from an almost standard 60 cell module frame size. Combining the best technology and design, it also reduces LCOE and installation costs.
With Canadian Solar’s industry leading poly-PERC cell technology and the innovative LIC (Low Internal Current) module technology, we are now able to offer our global customers high power poly percium modules up to 300 W.
Power Range: up to 305 W
Cell: 120 x dual-cell Percium Poly, 156 x 78 mm
Dimensions: 1675 × 992 × 35 mm
Weight: 18.5 kg
Wet lead acid battery - generally not suitable for mobile applications. Should not be located in living areas.
A company wide dedication to quality control and continual improvement has earned Crown Battery the highest quality and service rating in the industry. "We put more into our deep cycle batteries so you can get more out of them...
More performance, more productivity with less maintenance. Nobody builds them like Crown, because no one else invests in the heaviest, thickest plates in the industry. Our plates are over 10% thicker than our competitors.
Combine that with our proprietary PROeye and our low maintenance container - features that make battery maintenance predictable and efficient - and you've got a battery that's going to last longer and perform like no other."
Crown out-performs the competition in head to head tests over and over again.
"It must be a matter of perspective. But we aren’t prone to exaggeration, the way some of our competitors are.
If you claim to have batteries that out-perform all others, an independent laboratory should confirm the findings. That’s the way we do it at Crown. Since 1926, that’s all we’ve done. And to us, it really isn’t a matter of claiming to be first in the industrial marketplace; but being the best. Some manufacturers are comfortable making exaggerated claims.
We’re comfortable making battery history… one customer at a time."
"The heaviest, thickest plates in the industry. Thicker plates, heavier lead connections, and the most active lead material per ampere hour of rated capacity. And heavy means more lead, more active material. Which means more power. Longer life. Who would you put your money on? A lightweight battery? Or the heavyweight of the world. Crown."
Type: Wet lead acid
|A =||Automotive / SAE Top Terminal|
|D =||Standard Terminal (Dualo Automotive / Stainless Threaded Terminal)|
|F =||Commercial Threaded Stud Terminal|
|G =||Refer to Terminal Requirement Whn ordering Type A|
|I =||Cover with Raised Vent|
|J =||Battery Fitted with Handle or Lifting Lug|
|K =||PRO eye Fluid Indicator (Option for Gr 24/27/31)|
|L =||Antimony Alloy Construction: Low Maintenance Service|
New XTRA series - 3rd Generation MPPT
For 12V Solar System: 520W solar panel (150V for max input voltage)
For 24V Solar System: 1040W solar panel (150V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
With built in LCD advanced display and programming screen (XDS2)
New XTRA series has Lithium battery support (set via PC cable only)
The XTRA tracer models have a current limiting function, you can connect twice the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV & battery reverse polarity and etc. to ensure the sustainability and durability of the o-grid solar system.
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: