24v Version - 3Kw continuous output & 85A Charger
European Version - 230V output
These are the best inverters on the market. They are solid and reliable and what we use to run The Bimble Inn. You can stack them for more power and even combine 3 to make a 3 phase supply.
By adding the Mate Controller you can also use the outback inverters as a off grid/grid hybrid system allowing you to use the power from your batteries primarily and switching to use the grid when your batteries are low, thus minimising your use of the grid and ensuring you get the best use of your renewable power set-up, and yet never run out of power. Or you can configure an automatic generator start from them if needed.
OutBack Inverter VFX3024E, 3000 Watts 24 Volts 230 VAC/50 Hz
Ventilated Bug-Proof Off-Grid Inverter, Export Version.
The new OutBack VFX series is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.
Each OutBack FX or VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional VFX inverter/chargers can be connected at any time in either parallel (230 VAC) or three-phase (230Y400 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future.
Like the FX series, the OutBack VFX is also designed to survive harsh environments around the world. The full screened vent openings are "bug proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The VFX can be used in high ambient applications up to 60oC (with reduced output ratings). The OutBack VFX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PSDC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display. Up to eight VFX inverters can be connected together to provide up to 28,800 watts of continuous power conversion capacity.
Built to survive dust, bugs, even rain and salt air.
Ultra Clean AC Power
Smooth, pure sine wave AC output waveform - not a "34 to 52 step" sine wave approximation.
Easy System Expansion
Systems can grow with your needs- up to ten inverter/chargers can be stacked for up to 36,000 watts of continuous AC power.
High Surge Power
Proprietary current control system allows starting of larger motors than by other inverter designs.
Intelligent Battery Charger
Advanced charging algorithms provide fast recharging while increasing battery life.
Both FX and VFX inverter/chargers can be upgraded or serviced - even in the field.
The bug-proof VFX inverters only have a variable speed thermostatically controlled fan. No more transformer buzz to annoy you.
All OutBack products can be connected together to form a network with monitoring and control via a single MATE display.
Simple to Operate
Everything works automatically. The system can be installed and programmed and then the MATE system controller can be removed for totally goof-proof operation.
Capable Tech Support Help
You can call or email and ask questions of the engineers that desgined your products. Tech support doesn't get any better than that
Continuous Output Power: 3000 VA
Continuous Output Current at 25 degrees: 13.0 amps AC RMS
Idle Power (120 VAC Output No Load): 18-20 W DC
Output Voltage: 230 VAC/50 Hz
DC Input Voltage (Nominal): 24 VDC
Peak Efficiency: >90%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 85 amps DC
Frequency Range: 40-60 Hz
DC Input Voltage Range: 20-33 VDC
Recommended DC Breaker: OBDC-250
Standard Warranty: Two Years Parts and Labor
Optional Extended Warranty: Five Years Parts and Labor
Shipping Dimensions (LxWxH): 21.75" x 13" x 22" (300 x 210 x 410 mm)
Shipping Weight: 64 lbs. (29 kg)