Simple, flexible and durable 200Wp panel bundle to add to a boat or vehicle.
This also configurable with EPever 20A 12V/24V MPPT Charge Controller . Please contact us if you need assistance in amending this bundle.
If you have a boat, RV, holiday home or even professional equipment that relies on battery power for lighting, computers or small appliances then you know how frustrating it can be to find discharged batteries.
Spectra solar panels are ideal for maintaining and replacing natural discharge in 12V deep cycle batteries for leisure and light professional applications. Once installed, the solar panel works quietly and efficiently at recharging without any effort on your part. We guarantee that you will find our SpectraLite solar range a reliable and affordable choice.
Thanks to their robust design the panels are tough enough to be walked on and enables them to be effective in low power commercial applications where their non-glass construction makes them shatterproof and vandal resistant.
√ Panels are semi-flexible so can be slightly flexed without cell damage unlike conventional panels .
√ Corners are rounded with cut out eyelets for safe and easy installation.
√ Lightweight, ultra flat, extremely robust, scratchproof, and sea/salt water resistant.
√ Built in blocking diode and 3M twin core cable included.
√ Uses Sunpower’s Maxeon cells, proven to increase panel efficiency.
√ Coated with market leading brand DuPont ETFE for enhanced non slip and flexible design.
SunPower Maxeon Cells are industry leading solar cells, proven to be number one in efficiency. The Sunpower maxion cells are built in to the new SpectraLite Pro range, available in 50W,100W,150W and 200W.
Features
√High quality copper foundation that’s resistant to heat and humidity damage.
√Durable cell design flexes in fluctuating temperatures.
√ Unique cell architecture performs better than conventional silicon cells in cloudy weather and partial shade.
√Converts sunlight earlier and generation lasts longer through out the day compared to conventional panels.
√Flexible and durable design ensure a continuous flow of solar energy.
NOTE BARE WIRE ENDS, NOT MC4s
If you have a boat, RV, holiday home or even professional equipment that relies on battery power for lighting, computers or small appliances then you know how frustrating it can be to find discharged batteries.
Spectra solar panels are ideal for maintaining and replacing natural discharge in 12V deep cycle batteries for leisure and light professional applications. Once installed, the solar panel works quietly and efficiently at recharging without any effort on your part. We guarantee that you will find our SpectraLite solar range a reliable and affordable choice.
Thanks to their robust design the panels are tough enough to be walked on and enables them to be effective in low power commercial applications where their non-glass construction makes them shatterproof and vandal resistant.
√ Panels are semi-flexible so can be slightly flexed without cell damage unlike conventional panels .
√ Corners are rounded with cut out eyelets for safe and easy installation.
√ Lightweight, ultra flat, extremely robust, scratchproof, and sea/salt water resistant.
√ Built in blocking diode and 3M twin core cable included.
√ Uses Sunpower’s Maxeon cells, proven to increase panel efficiency.
√ Coated with market leading brand DuPont ETFE for enhanced non slip and flexible design.
SunPower Maxeon Cells are industry leading solar cells, proven to be number one in efficiency. The Sunpower maxion cells are built in to the new SpectraLite Pro range, available in 50W,100W,150W and 200W.
Features
√High quality copper foundation that’s resistant to heat and humidity damage.
√Durable cell design flexes in fluctuating temperatures.
√ Unique cell architecture performs better than conventional silicon cells in cloudy weather and partial shade.
√Converts sunlight earlier and generation lasts longer through out the day compared to conventional panels.
√Flexible and durable design ensure a continuous flow of solar energy.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Product Depth | 114 mm |
Product Height | 160 mm |
Product Type | DIN Enclosure |
Product Width | 85 mm |
Sikaflex®-522 is a low emission 1-component Silane Terminated Polymer (STP) sealant/adhesive. It has a high weathering and mold resistance. Sikaflex®-522 meets highest EHS standards. It bonds well to a wide range of substrates with minimal pre-treatment.
Sikaflex®-522 adheres well to a wide variety of substrates and is suitable for interior and exterior elastic sealing and bonding applications. It is suitable for applications in areas of air ventilation and incidental food contact. Suitable substrate materials include timber, glass, metals, metal primers and paint coatings (2-part systems), ceramic materials and plastics. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-522 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.
The SE7 side-entry twin cable gland is the perfect solution when space is limited or when loops from conventional top entry glands are not appropriate.
Available in various finishes, (but only in black with us) the entire SE series of glands are tested achieving the IP68 rating which ensures a perfect waterproof solution for various cable management applications.
Each unit is supplied with A4 stainless steel fixings. Suitable for two cables 3 – 6mm diameter supplied with tapered seals which ensure that the hole closes completely, creating a watertight seal around the cable.
Ideal for electrical cabling applications and ducting through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations.
Waterproof / dustproof (to IP68) gland with parallel low profile cable entry. Cable Size: 2 x 3mm – 2 x 6mm (3 pre-moulded bungs, no drilling required)
Designed for the Marine industry – IP68 for all applications
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Essential for preparing the surface, removing contaminates and residues before sticking your flexible CIGS panel down.
Check solution on inconspicuous paint area first.
Take note of the Material Safety Data Sheet attached under the Downloads tab.
100ml bottle.