zedPOWER E-Port including 3.6kWp PV and Sunsynk 3.6kW Storage Hybrid / Sunsynk 5.12kWh / 3.3kWp Solar Panel Kit
Domestic scale hybrid storage system.
The Sunsynk hybrid Inverter is modern inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. This Sunsynk inverter comes paired along with a Sunsynk CATL 5.12kWh battery package, a complete storage solution providing grid-backup for loads.
Designed to harvest & store solar electricity to minimise reliance on the grid
Fits almost any hardstanding or compacted surface
High quality, durable product designed to last a lifetime
Quickly installed and easily relocatable
8 x 445w YINGLI semi translucent double laminate glass panels
Timber Purlings and fixings
Gravel retaining galvanised mesh trays
Gravel retaining plastic top trays
NOTE - Customers will need to organise safe installation and delivery of suitable ballast to fill the gravel retaining counter balance system lots of different coloured stone chip options to choose from out there
Sunsynk CATL Battery LFP 5.12kWh
Weight: 47.5 kg
Battery Type: Lithium Ion
Nominal Energy: 5120 Wh
Depth of discharge: 100.00 %
Voltage: 48 V
Continuous Discharge Rate (Normal Use): 2400 W
Maximum Discharge Rate (5 Minutes): 4800 W
Surge Discharge Rate (15 Seconds): 9600 W
Maximum Charge Rate (5 Minutes): 4800 W
WARNING NOTE - You cannot mix Sunsynk BYD, CATL or IP65 batteries in the same system.
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;
Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.
The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.
NH00 rated at 250VDC, 160A,
Choose NH00 or NH000 fuses separately
Product measures 170mm H X 84mm W X 80mm D. Surface mountable.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.
Comes with a really handy key for checking connections when the cover is off .
Knock outs are also screw in which is really easy
NH000 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.
Fuses are rated at 250VDC
Hazard warning label pack for on grid solar PV system
Contains all the warning labels you need for an on grid, on roof solar PV installation.
Photo is indicitive.