The SOLiC Wireless automatically uses energy generated by your Solar PV panels  or other micro generation system by intelligently diverting your excess power to your immersion heater or similar load instead of exporting it to the grid.

The kit includes:
SOLiC Wireless main unit, SOliC Sensor, load sensor and clamp,  9Vac PSU, two antenna,  fitting instructions, mounting kit and 10-year warranty registration.

Features:

• UK manufactured with metal enclosures.
• The unit has 10 Year return-to-base warranty.
• Each unit is shipped with the sensor unit pre paired to the main unit.
• The unit uses a mains powered 433hz wireless system for consistent connection.
• The 433hz RF gives the unit over 100m line of sight range and over 30m in buildings.
• The main powered Sensor unit signals the main unit to correct the load’s power 5 times a second.
• The Sensor unit automatically sets the direction of the sensor clamp on start up.
• CE approved and safety tested.
• Class leading accuracy and a zero threshold maximising savings.
• The unit is standalone and does not affect existing FITs you are receiving.
• The sensor is mounted by the consumer board and sensor clamp clipped on either the Live or Neutral main’s tail gird side of the both the house loads and solar PV system.
• The main unit is mounted on the fused spur of the immersion heater but can also be used to power any resistive electrical heating load for instance a storage heater or an electric element in an oil filled radiator.
• You would expect a full priced installation to pay for itself in two to three years.
• The unit is thoroughly tested for reliability with over 2 years of operational testing completed.

Operation voltage: 230VAC mains single phase 50Hz
Mains voltage: 205 – 260VAC
Power consumption: 0.025W (at 230VAC)
Active current: 0.005A
Transfer efficiency: 99.6% (at max power)
Max load current surge: 600A for 10ms
Continuous load current: 13A
Mains frequency tolerance at 50Hz: nominally 2Hz
Operating temperature: 0 to 60C
Storage temperature: –20 to +75C
Operating and storage humidity: 10 to 90%, non condensing
Max impact force: 12G
Lightning and ESD protection: to 1.8kV
Current tracking accuracy: better than 90%
Export threshold: 0W
Audible noise emissions: below 10dBA
RFI (EMC) emissions: below -52dBW
Max power dissipation at 3kW output: 12W
Internal fuse: 250V 500mA 20mm slow blow
Insulation resistance: above 10M Ohms
Case isolation protection: better than 2.0kV
Case dimensions: 280 x 120 x 75mm
Total mass as supplied: 1kg