• Using the technology of lithium iron phosphate prismatic cells, superior safety, 3500 cycles or more

• JBD BMS Bluetooth enabled battery management system

• Low temperature charge protection inbuilt

• High current charge and discharge capability (250A)

• Maintenance free

• Internal cell balancing

• Lighter weight: About 40% ~50% of the weight of a comparable lead acid battery

• Can be charged using most standard lead-acid chargers, MPPT solar chargers and alternator charging

• *Note Smart alternators will need a DC-to-DC charging system.

The Archibald LifePO4 units are equipped with the latest JBD Bluetooth BMS.

The batteries can be charged from most Charging sources as long as they fall into the parameters of the chosen unit, with the exception of a PWM solar controller.
*PWM chargers are not suitable for BMS equipped LiFePO4 units*

If using a standard 240v – 24v Car battery charger if present, use the sealed lead acid / AGM setting if a specific lithium setting is not available.

The same applies to solar chargers, if this setting is not present the equalisation charge should be set in the off position.

The Archibald unit can be used in a split charge system where it is charged from the alternator. Smart alternator systems should be equipped with a DC-to-DC charger, please check your vehicle specs

BOAT OWNERS BEWARE - Dedicated domestic bank alternator to Lithium battery charging is not recommended, due to sudden disconnect which can damage alternator.

5 Year Warranty 

A Grade EVE Cells.

Fitted with JBD (Overkill) fully programable BMS

See review on this BMS here.
REVIEW

Fitted with JBD (Overkill) fully programable BMS.

See review on this BMS here.
REVIEW

Bluetooth APP Download.

Apple download .APPLE APP

Android download.ANDROID APP

With low temperature charge cut off.

Bluetooth links - CLICK HERE

Charge Voltage 28V

Charge Cut-off Voltage 29.2V

Discharge Cut-off Voltage 21.6V

• Battery 24V-100Ah – Lithium Iron Phosphate (LiFePO4 – LFP)
• Nominal voltage : 25.6V
• Stored Energy : 2.6 kWh
• New high performance cell
• 3000 cycles at 100% DoD @ 1C 
• 4500 cycles at 80% DoD @ 1C
• 98% energy efficiency
• Weight : 22.6Kg
• Dimensions : 490±2mmWidth: 170±2mm Height: 240±2mm
• Continuous discharge current : 100A
• Peak discharge current (< 30s) : 180A 
• Maximum continuous charge current : 100A
• High safety with advanced Built-in Battery Management System
• Monitoring of cell and PCB temperature, current, voltage, cell balancing, etc.
• 100% Maintenance free
• Serial assembly can range from 24V to 96V (up to 4 items in series)
• Parallel assembly up to 16 items (24V-100Ah )
• Robust design in an insulated and waterproof casing
• Operating temperature in charge : 0°C  +60°C
• Operating temperature in discharge: -20°C à +60°C
• Sealed case 
• CE, RoHS and UN38.3 certification