-
Email Us [email protected]
-
You have 4 item(s) in your cart
-
BYD HVS Lithium Battery Module 2.56kWh3 x £3,347.50
TOTAL: £3,830.83 +vat -
- Panels & Mounts
- Off Grid
- Battery Items
-
On Grid
-
PV and Inverter Bundles with Battery Storage
-
Inverter Bundles with Battery Storage (ESS)
-
PV and Inverter Bundles Grid only - No storage
-
Retrofit Battery Storage for existing PV Systems
-
Solar PV only Inverters
-
Hybrid Battery Inverters
-
Immersion Control and Energy Diversion
-
Accessories, AC DC Switches & Gen Meters
-
-
More
-
AC Electrics inc 16A Hook Up
-
Cable, Lugs & Crimping Tools
-
DC & PV Distribution
-
DC Breakers, Fuses & Enclosures
-
Electric Vehicles - EV
-
Generators
-
LED Lighting
-
Installers Section, Meters & Books
-
Other items inc Accessories eg Victron, EPever etc
-
Tools & Sealant
-
Infrared Heating, Water Pumping & Heating
-
-
Help & Guidance
WHERE TO BEGIN…
OFF GRID GUIDE
ON GRID GUIDE
CALCULATION TOOLS & APPS
SOLAR PANEL COMPARISON TOOL
BATTERY COMPARISON TOOL
VICTRON PRE-BUILT BOARDS
VICTRON PROFESSIONAL TRAINING
FIND AN INSTALLER
SCHEMATIC EXAMPLES
BEST PRACTICES
GENERATORS
BATTERY MAINTENANCE GUIDE
LINKS
CONTACT US
SUPPORT
DELIVERY INFORMATION
- Panels & Mounts
- Off Grid
- Battery Items
-
On Grid
-
More
-
Brands
-
Popular Brands
- Help & Guidance
- WHERE TO BEGIN…
- OFF GRID GUIDE
- ON GRID GUIDE
- CALCULATION TOOLS & APPS
- SOLAR PANEL COMPARISON TOOL
- BATTERY COMPARISON TOOL
- VICTRON PRE-BUILT BOARDS
- VICTRON PROFESSIONAL TRAINING
- FIND AN INSTALLER
- SCHEMATIC EXAMPLES
- BEST PRACTICES
- GENERATORS
- BATTERY MAINTENANCE GUIDE
- LINKS
- CONTACT US
- SUPPORT
- DELIVERY INFORMATION
-
- Panels & Mounts
- Off Grid
- Battery Items
-
On Grid
- - PV and Inverter Bundles with Battery Storage
- - Inverter Bundles with Battery Storage (ESS)
- - PV and Inverter Bundles Grid only - No storage
- - Retrofit Battery Storage for existing PV Systems
- - Solar PV only Inverters
- - Hybrid Battery Inverters
- - Immersion Control and Energy Diversion
- - Accessories, AC DC Switches & Gen Meters
-
More
- - AC Electrics inc 16A Hook Up
- - Cable, Lugs & Crimping Tools
- - DC & PV Distribution
- - DC Breakers, Fuses & Enclosures
- - Electric Vehicles - EV
- - Generators
- - LED Lighting
- - Installers Section, Meters & Books
- - Other items inc Accessories eg Victron, EPever etc
- - Tools & Sealant
- - Infrared Heating, Water Pumping & Heating
- Battery Comparison Tool
- BATTERY MAINTENANCE GUIDE
- FIND AN INSTALLER
- Help & Guidance
- Pay Monthly Finance
- OFF GRID GUIDE
- ON GRID GUIDE
- Where to begin…
- Delivery Information
- Privacy Policy
- Payment Info
- Terms & Conditions
- CALCULATION TOOLS
- Victron Pre-built Boards
- Victron Professional Training
- Tools
- BEST PRACTICES - GUIDES, RULES AND PROCEDURES
- Create Cheap Solar Fridge
- Trade Accounts
- Boat Fitting
- LINKS
- SCHEMATIC EXAMPLES
- Solar Equipment VAT
- Contact Us
- Site Map
Sunsynk 3.6kW Hybrid Inverter bundle with 4.8kWh of Pylon US5000 Battery storage and 4.92kWp of Hyundai DG series Solar PV
Sunsynk 3.6kW Storage Hybrid / Pylon 4.8kWh / 4.92kWp Solar Panel Kit
A domestic scale hybrid storage system, providing grid-backup for critical loads such as communications, lighting, boiler and fridge, at an exceptional price.
The Sunsynk hybrid Inverter manages the power flow from multiple sources such as solar, main electrical grid and generator and comes paired with a Pylon 4.8kWh battery package and over 4.9kWp of Hyundai DG series solar panels(30 years warranty)
This is a complete storage solution allowing you to utilise the SEG (smart Energy Guarantee) via integration with Octopuse Energy on the Sunsynk app Smart energy
This can also be configured with with Sunsynk 5.12kWh batteries and is Interchangeable with: Canadian solar and Perlight solar PV panels.
Please contact us if you need assistance in amending this bundle.
Click items to show/hide description...
1 x
Pylon 4.8kWh US5000 LiFePO Battery - 48V Lithium
Pylon US5000 4.8kWh Li-Ion Solar Battery 48V (excl. brackets)
A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market.
Please use a dimension of 4U per module when sizing a cabinet for these batteries.
Product Features
- Modular design for ease of expansion
- Higher usable capacity resulting in less battery modules installed
- Usable capacity 4 560Wh
- Parallel Capability of up to 16 units
- Allows for large installation of up to 72.96kWh with no LV Hub
- Intelligent BMS protecting battery cells
- 95% DoD with more usable capacity
- RS485 and CAN compatible
- Comes with a 5-year warranty extendable
- Long cycle life and superior performance
- Compatible with tier 1 inverter brands
If you want to use these batteries with Victron equipment please read this article to select the correct equipment:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
Here is the link to register your batteries and receive extended warranty:
https://en.pylontech.com.cn/service/support/
12 x
410W Hyundai DG Total Black Solar Panel. Delivery from £33 - MCS Approved - All black Premium panel - 25 year warranty
1 x
Sunsynk ECCO 3.6kW Solar Hybrid Inverter - Single Phase - WiFi included
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;
- Dual MPPT design
- Compatible with Lithium-ion batteries and Lead Acid batteries
- Up to 50kWh battery pack
- 5yr warranty as standard
- IP65 rated
- Anti-islanding protection
- Fully programmable power export
- Automatic switching from Grid-Tied to Off-Grid mode
- Up to 16 units with the same firmware can be paralleled
-
Adding a Sunsynk battery to your existing inverter will extend the inverter warranty to 10 years. This must be done within 3 months of the original installation for eligibility. If done later than this, the battery will be registered separately at 10 years, and the inverter maintains a 5 year warranty.
Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.
SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy
4 x
Premade MC4 6mm Solar Cable 20 meter - (Cut in half to make two MC4 to bare wire cables when used in our bundles) 20M length
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
2 x
Europa Single String DC Switch Disconnector 16A 4 Pole Enclosed - Can be tested with cover off
LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.
Features
- Compact and reliable
- Finger protection
- Easy installation
- Wiping contacts
- Excellent switching and high short circuit capacity
Applications
- Photovoltaic - Isolators
- Isolator
- Main Switch
- Emergency ON/OFF
- Inverter Applications
- AC / DC Changeover in Solar Pumps
Enclosure Technical
- Degree of Protection: IP66
- Switch rear mounted for easy connection
- Enclosure colour: Dark grey base and light grey cover.
- Switch mounted in ABS enclosure.
- Round padlocking device (Max.3 padlocks) to prevent the Switch from being made ON by unauthorised personnel
- Interlock Feature (Cover opens only in OFF position)
- 4 + 4 Knockouts so two strings can be wired (500V / String)
- M12 Knockouts suitable for MC4 Connectors
- Switch rated at 1500V
Comes with a really handy key for checking connections when the cover is off .
Knock outs are also screw in which is really easy
1 x
Pylon Battery Mounting Bracket for US5000 - Pair
A set of battery brackets which allows vertical stacking of the Pylon US5000 battery unit. 1 set required per battery.
1 x
DC Fused Disconnect 2-pole NH00 or NH000 size, M8 fixings, 160A DC max
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.
The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.
NH00 rated at 250VDC, 160A,
Choose NH00 or NH000 fuses separately
Product measures 170mm H X 84mm W X 80mm D. Surface mountable.
1 x
Pylon Batteries DC Cable Pack 25mm - 1 or more sets required see description
Pylon battery cable accessory kit for use with all the different battery models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the inverter/charger.
Please check the number of cable packs you need, according to your inverter/charge specifications. Each cable pack is rated at 100A continuous, and 125A peak.
This cable pack includes the following cables:
2 x 2m long power cables (1x positive and 1x negative) The cables are 25mm² and have an M8 eyelet on one end of each cable.
2 x
125A fuse NH00, 250VDC for NH00 DC Fuse Disconnect
NH00 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.
Fuses are rated at 250VDC
1 x
Hazard warning label bundle for solar PV system
Hazard warning label pack for solar PV system
Contains all the warning labels you need for an on grid, on roof solar PV installation.
Photo is indicitive.
6 x
25mm cable end lug, 8mm hole, heavy duty copper tube terminal
25mm squared cable end lug for crimping onto 25mm² multi-stranded battery cable. Heavy duty lug with flared cable entry. Tin plated copper. Made in the UK
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.Add all bundle items separately to cart
Battery | |
Watt Hours | 5120 |
Chemistry | LFP |