Great for small spaces or if you need to fit panels in around roof lights etc. Also great for keeping your starter battery topped up.
Made with Sunpower E20 super high effeciency cells, and designed to be stuck down, these are great for vans, campers and boats. They are light weight at just 0.6Kg each and you can just stick to your roof even if curved with CT1 which we have here.
We can ship this panels worldwide. As they are not glass panels, so we can ship with standard couriers at affordable rates.
Solar cell: Sunpower E20 A grade Cells
Cells size (mm):125x24.5
Cells per module: 2 x 16
Module size (mm): 490 x 285 x 3mm
Power tolerance: +/-3%
Nominal peak power(WP): 20
Nominal voltage(V): 19.8
Nominal current (A): 0.97
Open circuit voltage (Voc): 23.40
Short cirsuit current(Isc): 1.03
Cell Conversion efficiency: 23.70%
Operating temperature: -40 to+85°C
Max system voltage: 45V DC
Net Weight(kg): 0.6kg
Junction box with 900mm cable and MC4 connectors
Note:Junction box at the front of the panel
Manufacturers Warranty: Guarantee that Power output will be at least 95% after 8 years and more than 85% after 10 years, 2 years repair/replacement.
Please note: These panels are not designed to be walked on.
As theses are non-glass panels we can use standard couriers for delivery so delivery starts at just £3.00 for the first panel.
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Premade 6mm Solar Cable with MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 2.5m lengths MC4 to bare wire)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
Great for use with our 20W semi-flexi panels. Can use upto 3 panels on 1 controller. Waterproof so perfect for easy outdoor use for things like electric fences, gates etc.
1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.
voltage of solar panels:30W(5A,6V)/60W(5A,12v)
Charge-stop Voltage: 7.2V(6V)/14.4V(12V)
Coefficient of Stop Voltage and Temp:-3mV/degree/cell
Supply-stop Voltage: 5.3V(6V)/10.6V(12V)
Supply-resume Voltage: 6V/12V
Light Control Mode:Visibility 20M
Working Temp:-10- +40degree;
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for upto 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Rated at 41A/600V
Wire combination: 0.5mm² to 6.0mm², Min. 3x0.5mm², Max. 2x6.0mm²
Ratings & Wire Size Combinations