An easy 12V lithium solution. These batteries have a clever BMS (Battery Management System) that allows 2 batteries to be run in parallel; and for up to 4 batteries to be run in series to make 24V and 48V banks.
Length (mm) | 151 |
---|---|
Width (mm) | 98 |
Height Inc Terminals (mm) | 101 |
Weight | 1.55 |
Voltage (V) | 12.8 |
Ah | 12 |
Layout | LH+ |
Terminal | M8 |
Battery Type | Lithium |
Bimble Solar 50W Panel
50W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 620 x 450 x 25mm
MC4 ended premade solar cables are 60cm long each
Highlights
Certificates
Warranty
We have packages for both off grid solar panel systems and on grid Installations. (see other listings)
As theses are small panels we can use standard couriers for delivery so delivery is cheaper.
Or you can collect for FREE from Near Brighton, East Sussex
New XTRA series - 3rd Generation MPPT
For 12V Solar System: 130W solar panel (60V for max input voltage)
For 24V Solar System: 260W solar panel (60V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
With built in LCD advanced display and programming screen (XDS2)
New XTRA series has Lithium battery support
The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the off grid solar system.
Features:
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Electronic Protections:
The MT52 remote meter, compatible with controllers featuring RS485 communication, enables real-time monitoring of the controller's operation and parameter programming. Key features include easy installation and operation, real-time display of fault alarms, local reading of parameters, direct power supply from the controller, and an RJ45 communication port.
Self-consumption | Backlight ON<23mA Backlight OFF<15mA |
Faceplate dimension | 98mm × 98mm |
Frame dimension | 114mm × 114mm |
Communication port | RJ45 |
Communication cable (m) | Standard: 2m, Longest: 50 m |
Net weight | Simple package: 0.23 Kg Standard package: 0.32kg |
Environment temperature | -20℃~+70℃ |
Optional Meter for AN, BN, CN, XTRA MPPT charge controllers. DuoRacer requires the MT11, see separate listings.
Comes with 2m RJ45 cable in the box, if you need longer we have a 5m cable here 5m RJ45 Cable for MT52
PLEASE NOTE - YOU CANNOT USE THE MT52 AT THE SAME TIME AS THE OPTIONAL ADAPTORS
Use with lithium batteries: The MT52 ( sv 2.18 version) can be used to program a lithium battery for our XTRA controllers. However it cannot do this for the Tracer-AN 60A and 100A. You must use a PC cable and software for programming lithium.
The set includes 6 brackets (4 corners and 2 sides) and cable entry gland.
These mounts are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method.
The mounts will support the solar panel at 25mm above the surface enabling airflow underneath which keeps it cool, ensuring the solar panel functions at it's optimum.
If using with panels equal to or under 175W, you can secure the panel by screwing or bolting it to the mounting corner. The corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' which we sell in black white or clear. See related products tab. This removes the need to drill holes in your roof!
You must ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey.
If you are using panels over 175W in size we recommend that not only do you bolt or screw the panel to the corners but additionally bolt or screw the mounting to the roof as well.
If fitting any panel to a vehicle we would recommend the belt and braces approach of bolting or screwing the panel to the mounts and additionally bolt or screw the mounts to the roof. The strength of these systems is only as strong as the roof type or paint on your roof!
Notes:
- ABS mounts raise the panel by 25mm. Edge of panel to edge of ABS is 55mm.
- You need to purchase additional self tappers or bolts to fit the panel to the ABS mounts, see below for one method which is a good tutorial to get you started...
Durite's large black plastic automotive battery box.
Dimensions
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Premade 6mm Solar Cable with MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 2.5m lengths MC4 to bare wire)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Specification
HAR approved. Flat flexible cable with white PVC insulation for indoor applications. Copper conductor. BS 6500.
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
This comes with a cradle for keeping your MC4 connectors in place and tidy.
Dimensions:
Length 182mm
Width 95mm
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Miniature Chrome Toggle Switch - Surface mount for 12V Lighting
Features
· Surface mount, miniature single pole, single throw toggle switch.
· Connections made by screw terminals on base.
· Suitable for low voltage applications only
Technical Specifications
Maximum Voltage : 12V
Maximum Current : 3A
Connection Type : Screw Terminal
Base Diameter : Æ 28mm
Fixing Centres : 20mm
Fixing Hole Dia. : 2.8mm
Body Height : 15mm
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: