A great all in one solution from a very reliable manufacturer. This makes solar easy, you just plug it all in, programme it and away you go!
All-in-one solar power solution
The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring, just plug in all in, set it up for your application and away you go. The Easy solar 24/1600 contains a Smart solar MPPT 100/50 and a Multiplus Compact 24/1600.
The solar charge controller: Smart Solar MPPT 100/50, up to three strings of PV panels can be connected with three sets of MC4 (PV-ST01) PV connectors to the single MPPT
The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40
The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (Smart Solar MPPT) and/or with AC power (inverter/charger) from the utility grid or a generator.
It is recommended to purchase a MK3 USB interface to programme the inverter with the appropriate settings for your particular application and battery type. If you are using a GX device such as a Cerbo or Colour Control and have an internet connection on site then a MK3 USB interface would not be necessary.
The Easy Solar 12/1600 comes with 1.5m each of pre installed 25mm² battery cable. It has a built in DC fuse. Its recommended to install an isolator in the positive cable to the battery.
| Victron Specifications | |
| Battery Voltage Nominal | 24 V |
| Power Control | 1 |
| Power Assist | 1 |
| Transfer Switch Current Rating | 16 A |
| Heavy Ac Current | 19 A |
| DC Input Voltage Range | [19, 33] VDC |
| AC Output Voltage | 230 VAC |
| AC Output Frequency | 50 Hz |
| Cont Power VA25 | 1,600 VA |
| Cont Power W25 | 1,300 W |
| Cont Power W40 | 1,200 W |
| Peak Power Rating | 3,000 W |
| Max Efficiency | 94 % |
| Zero Load Power | 10 W |
| Zero Load Power Search | 3 W |
| AC Input Voltage Range | [187, 265] VAC |
| AC Input Frequency Range | [45, 65] Hz |
| Charge Voltage Absorption | 28.8 VDC |
| Charge Voltage Float | 27.6 VDC |
| Charge Voltage Storage | 26.4 VDC |
| Charge Algorithm | Adaptive, 4-stage |
| Maximum Battery Charge Current | 40 A |
| Starter Battery Charge Current | 4 A |
| Temperature Sensor | Included |
| Solar Charger Model | MPPT 100/50 |
| Max Output Current Solar | 40 A |
| Max Pv Power | 1,400 W |
| Max Pv Open Circuit Voltage | 100 V |
| Maxi Efficiency Solar Charger | 98 % |
| Self Consumption | 10 mA |
| Charge Voltage Absorption1 | 28.8 VDC |
| Charge Voltage Float1 | 27.6 VDC |
| Charge Algorithm1 | Multi-stage adaptive |
| Auxiliary Output | 1 |
| Programmable Relay | Yes |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Communication Port | VE.Direct |
| Remote Terminal | On / Off / Charger only |
| Computer Programming | 1 |
| Fan Assist Cooling | 1 |
| Max Humidity | 95 % |
| AC Connection Terminal Type | G-ST18i plug |
| Battery Connection Terminal Type | Red and black 1.5 meter cable with M8 eyelets |
| PV Connection Terminal Type | MC4 connectors (three pairs) |
| Remote Terminal Type | Screw terminal two pole |
| Relay Terminal | Screw terminal 3-pole |
| Vebus Terminal Type | Two RJ45 terminals |
| Material | Aluminium |
| Colour | Blue (RAL 5012) |
| Protection Category | IP21 |
| Weight | 15 kg |
| Height | 745 mm |
| Width | 214 mm |
| Depth | 110 mm |
| Safety | EN-IEC 60335-1,EN-IEC 60335-2-29 |
| Emission Immunity | EN 55014-1,EN 55014-2,EN-IEC 61000-3-3 |
| Automotive Directive | ECE R10-4 |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
