60A MPPT with max VOC 150V - with barewire terminals (contact us for MC4 terminals)

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN(long-range wide area network) device, available optionally.

Optional SmartSolar Control Display

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

VictronConnect

VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.

Download full spec sheet

Learn more about TCL-Solar - Click above

TCL Solar E-class, a premium solar module designed with back-contact cell architecture for a sleek, all-black aesthetic. This design not only enhances the visual appeal of rooftops—especially important in Britain's architecturally sensitive environments—but also boosts energy efficiency by maximising light absorption. SunPower panels complement this offering with their renowned reliability and long-term performance, making them a top-tier choice for residential and commercial installations.  These modules are ideal for customers who value design as much as performance.

HSM-BD54-DA460

Learn more about E-Class TCL-Solar Modules - Click below

Long Aluminium Mounting Brackets - Stick down on Boats - Rivet down on vans

Use one pair for up to 100w panels and 2 pairs larger panels.  Three or more pairs for the largest panels over 2m long is highly recommended.  Bear in mind judgement is important when using this guidance, each fit is different and you need to judge the best fit for yourself.

Specification:
Foot print (550mm long, 75mm wide)
Rivet plate 25mm
Panel ledge 30mm

Height 59.5mm

The panel will sit 2.5cm up on the ledge from the plate that is riveted / bolted to the substrate (roof).

35mm² cable per meter, Class 6 multi-stranded extra flexible tinned copper conductor, 225A rated for 5mins @ 100% Duty cycle

Conductor diameter 6.7mm, Overall diameter including sheath 13mm

Why Orange?  Why no Red & Black options...

We only sell loose orange weld cable which is better than the red or black alternatives. It's top quality tinned copper cable, you need to accept the colour of the sheath or heat shrink over it. The benefits of tinned copper is better conductivity and much great corrosion resistance for marine and mobile applications.

In addition, our battery cables are manufactured in accordance with BS 638 Part 4 & EN 50525-2-81. It has a rubber compound to achieve the 85deg temp rating to meet all the requirements of EM5, that allows the cable to achieve the increased current carrying capacity.

Inferior cable has PVC instead of rubber and can only achieve a 70deg temp rating, which suggest a reduced current carrying capacity and inability to meet EM5 standards.

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

4 Way unit can hold our Tomzn DC and AC breakers

At its widest points the enclosure measures:

208mmL x 141mmW x 100mmD 

 Unit can hold the following options:

• 2 x AC RCBos
• 4 x DC breakers Under 60A
• 2 x DC breakers 80A - 125A

This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

A small, low cost multimeter supplied with test leads and holster.

• 3½ digit, 1999 count display
• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode, continuity and transistor tester
• Square wave output
• Low battery indication
• Requires a 9V PP3 battery (included)

DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm  

Cable Gland Entry Box, use to connect through external surface.  Perfect for solar panel cables coming from outside to controller.

This comes with a cradle for keeping your MC4 connectors in place and tidy.

Dimensions:

Length 182mm

Width 95mm

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.