-500x500.png "Victron SmartShunt 1000A Battery Monitor with built in Bluetooth (IP65)")
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
This unit has M10 bolts.
| Victron Specifications | |
| Supply Voltage Range | [6.5, 70] VDC |
| Current Rating | 1,000 A |
| Battery Capacity Measurement Range | [-?, 9,999] Ah |
| Current Draw | 1 mA |
| Input Voltage Measurement Range Auxiliary Battery | [6.5, 70] VDC |
| Aux Input Fo Auxiliary Battery Voltage | 1 |
| Temperature Sensor | Optional (ASS000100000 - Temp. sensor for BMV) |
| Communication Port | VE.Direct |
| Bluetooth | 1 |
| Programmable Relay | -1 |
| Current Measurement Resolution | 0.1 A |
| Voltage Measurement Resolution | 0.01 V |
| Capacity Measurement Resolution | 0.1 Ah |
| State Of Charge Measurement Resolution | 0.1 % |
| Time To Go Measurement Resolution | 1 min |
| Current Measurement Accuracy | 0.4 % |
| Current Measurement Offset | 20 mA |
| Voltage Measurement Accuracy | 0.3 % |
| Positive Cable | 1.5m cable with 1A fuse |
| Aux Cable | 1.5m cable with 1A fuse |
| Ve Direct Cable | 1.5m cable with a VE.Direct socket. Note that a (not included) VE.Direct cable is needed to connect a GX device |
| Shunt Connection Terminals | M10 bolts |
| Protection Category | IP65 |
| Weight | 1.22 kg |
| Height | 68 mm |
| Width | 168 mm |
| Depth | 75 mm |
| Front Diameter | 63 mm |
| Body Diameter | 52 mm |
| Body Depth | 31 mm |
| Safety | EN 60335-1 |
| Emisison Immunity | EN-IEC 61000-6-1, EN-IEC 61000-6-2,EN-IEC 61000-6-3 |
| Automotive Directive | EN 50498 |
| Data Stored | Battery voltage,Battery current,Battery temperature,Battery state of charge percentage,Battery midpoint deviation,Starter battery voltage |
| Data Retention Period | 46 d |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
