-500x500.png "Victron BlueSolar PWM Charge Controller LCD and USB 12V or 24V - 10A")
-500x500.png "Victron BlueSolar PWM Charge Controller LCD and USB 12V or 24V - 10A")
-500x500.png "Victron BlueSolar PWM Charge Controller LCD and USB 12V or 24V - 10A")
-500x500.png "Victron BlueSolar PWM Charge Controller LCD and USB 12V or 24V - 10A")
Liquid crystal display For status monitoring and set-up.
Load output Over-discharge of the battery can be prevented by connecting all loads to the load output.
The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output.
A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output. This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs Maximum current (both outputs combined): 2A
| Victron Specifications | |
| Battery Voltage | 12V / 24V (automatic detection) |
| Rated Charge Current | 10 A |
| Pv Array12v | Solar panel with 36 cells |
| Pv Array24v | Solar panel with 72 cells,Two solar panles with 36 cells in series |
| Self Consumption | 10 mA |
| Load Output | Manual control + low voltage disconnect +timer |
| Protections | Battery reverse polarity (fuse),Output short-circuit,Excessive temperature |
| Overload Protection130 | Shutdown after 60 seconds |
| Overload Protection160 | Shutdown after 5 seconds |
| Overload Protection SC | Immediate shutdown |
| Temperature Sensor | No |
| Temperature Compensation | No |
| Remote Panel | No |
| Grounding | Common positive |
| Max Humidity | 95 % |
| Charge Voltage Absorption | 14.4V / 28.8V |
| Charge Voltage Float | 13.7V / 27.4V |
| Low Voltage Load Disconnect | 11.2V / 22.4V |
| Low Voltage Load Reconnect | 12.6V / 25.2V |
| Number Of Usb Ports | 2 |
| U SB Voltage | 5 V |
| U SB Current | 2 A |
| Colour | Blue (RAL 5012) |
| Protection Category | IP20 |
| Weight | 0.15 kg |
| Height | 96 mm |
| Width | 169 mm |
| Depth | 36 mm |
| Safety | EN-IEC 60335-1,EN-IEC 62109-1 |
| Emission | EN-IEC 61000-6-1,EN-IEC 61000-6-3,ISO 7637-2 |
| Charge Controller | |
| Max VOC | 28 or 55 |
| Amps | 10 |
| Voltage | 12 or 24 |
| Cable Connection | |
| Type and size | 16A din mount breaker for example |
| Size mm2 | 6mm2 |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
