INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES.  NOTE - YOU CANNOT MIX BATTERY TYPES.

Sunsynk's latest IP65 battery, available in 5.32kWh and 10.64kWh capacities, features advanced LiFePO4 (lithium iron phosphate) battery cell technology. This robust battery is designed to charge at temperatures as low as -10°C and discharge at temperatures down to -20°C, ensuring reliable performance in harsh conditions. Additionally, the battery includes an inbuilt 125A MCB (Miniature Circuit Breaker) for enhanced safety and protection.

5.32kWh
W-Series Battery
SUNSYNK-W5.3

Features

• LiFePO4 chemistry.

• Charges at  -10°C, discharges at -20°C.

• Integral 125A, double pole MCB.

• IP65 (can be installed outdoors).

• Max. 32 batteries in parallel.

• 90% DoD (depth of discharge).

• Cell level monitoring (optional).

• Wall or rack-mounted.

• Available in white & black.

The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;

• Dual MPPT design 
• Compatible with Lithium-ion batteries and Lead Acid batteries
• Up to 50kWh battery pack
• 5yr warranty as standard
• IP65 rated
• Anti-islanding protection
• Fully programmable power export
• Automatic switching from Grid-Tied to Off-Grid mode
• Up to 16 units with the same firmware can be paralleled 

•  Adding a Sunsynk battery to your existing inverter will extend the inverter warranty to 10 years. This must be done within 3 months of the original installation for eligibility. If done later than this, the battery will be registered separately at 10 years, and the inverter maintains a 5 year warranty.

Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.  

SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy

Only suitable for Sunsynk IP65 batteries. There is no communication cable included; the required battery/inverter communication cable is included with the Sunsynk IP65 battery.

These cables are 1.5m in length.

*Please note: There are no lugs on the cable ends for the inverter connection, so be sure to order suitable lugs separately. See 'Related Products' for suitable 25mm2 lugs.

**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**

Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.

The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.

NH00 rated at  250VDC, 160A,

Choose NH00 or NH000 fuses separately

Product measures 170mm H X 84mm W X 80mm D. Surface mountable.

NH000 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

Hazard warning label pack for solar PV system

Contains all the warning labels you need for an on grid, on roof solar PV installation.

Photo is indicitive.