The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fuse monitoring. The negative busbar has four connections and a ground connection.
The fuse and cable connections are always M8. The Lynx Distributor has a power LED and four fuse status indication LEDs. If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can.
It will monitor the status of each fuse and indicate its condition with a LED if used in conjunction with Lynx Shunt VE Can. The Lynx Distributor is part of the modular Lynx distribution system. See here for the Lynx Power In bus bar: https://www.bimblesolar.com/V-LYNX-PWRIN-M10
| Victron Specifications | |
| Voltage Range | [9, 60] V |
| Current Rating | 1,000 A |
| System Voltages | 12V or 24V or 48V |
| Reverse Polarity Protection | Yes (he RJ10 cable connection is not protected against reverse polarity) |
| Power Consumption | Maximum 100mA with all LEDs illuminated (Powered from Lynx Shunt VE.Can or Lynx Smart BMS) |
| Busbar Material | Tinned copper |
| Busbar Dimensions | 8mm x 30mm |
| Max Humidity | 95 % |
| Busbar Connections | M8 |
| Fuse Connections | 3/8" |
| Data Connection | 40 cm RJ10 cable (included) |
| Material | ABS |
| Colour | Blue (RAL 5012) |
| Protection Category | IP22 |
| Weight | 2.2 kg |
| Height | 170 mm |
| Width | 290 mm |
| Depth | 80 mm |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
