The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built-in battery monitor accurately monitors the state of charge of your battery. Use a GX device (e.g. Cerbo GX) for reading out the information. Part of the modular Lynx distribution system.
The M10 version of the Lynx Shunt can accommodate both ANL fuses as well as Megafuses, in addition to the CNN type.
You will need an RJ45 communications cable to connect the shunt to a Cerbo GX.
| Victron Specifications | |
| Voltage Range | [9, 70] V |
| Current Rating | 1,000 A |
| System Voltages | 12V or 24V or 48V |
| Reverse Polarity Protection | No |
| Power Consumption | 60mA (12V) / 33mA (24V) / 20mA (48V) |
| Programmable Relay | Potential free alarm contact: 3A at 30VDC or 250VAC |
| Busbar Material | Tinned copper |
| Busbar Dimensions | 8mm x 30mm |
| Max Humidity | 95 % |
| Busbar Connections | M10 |
| Fuse Connections | M8 |
| Fuse Dummy | Included |
| Ve Can | RJ45 (Two RJ45 terminators included) |
| Power Connection Distributor | RJ10 (RJ10 cables ship with each Lynx Distributor) |
| Temperature Sensor Connection | Screw terminals |
| Relay Connection | Screw terminals |
| Material | ABS |
| Colour | Blue (RAL 5012) |
| Protection Category | IP22 |
| Weight | 1.4 kg |
| Height | 190 mm |
| Width | 180 mm |
| Depth | 80 mm |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
