The Sun Inverter combines a sinewave inverter and a PWM solar charger in one enclosure and is easy to install, with a minimum of wiring.
The inverter allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V or 24V.
The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable.
The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this, the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.
Models:12V|250VA and 24V|250VA
| Victron Specifications | |
| Battery Voltage Nominal | 12 V |
| Cont Power W25 | 200 W |
| Cont Power W40 | 175 W |
| Peak Power Rating | 400 W |
| AC Output Voltage | 230 V |
| Frequency Select | 50Hz or 60Hz |
| DC Input Voltage Range | [9.2, 17] V |
| DC Low Shut Down | 9.3 V |
| DC Low Restart Alarm | 10.9 V |
| Dynamic Low DC Shutdown | 1 |
| Battery Charged Detection Voltage | 14 V |
| Max Efficiency | 87 % |
| Zero Load Power | 4.2 W |
| Zero Load Power Eco Mode | 0.8 W |
| Solar Technology | Pulse With Modulation (PWM) |
| Solar Panel Type | Solar panel with 36 cells |
| Charge Voltages | Adjustable and able to be temperature compensated |
| Temperature Sensor | Optional (Smart Battery Sense) |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,Excessive DC ripple |
| Bluetooth | Yes |
| Remote On Off Terminal | 1 |
| Communication Port | Bluetooth,VE.Direct |
| Fully Programable | 1 |
| Max Humidity | 95 % |
| AC Outlet Socket | IEC-320 (male plug included) |
| Remote Terminal | Screw terminal two pole |
| Colour | Blue (RAL 5012) |
| Material | Steel chassis and plastic cover |
| Protection Category | IP21 |
| Weight | 2.4 kg |
| Height | 86 mm |
| Width | 165 mm |
| Depth | 260 mm |
| Safety | EN-IEC 60335-1,EN-IEC 62109-1 |
| E MC | EN 55014-1,EN 55014-2,EN-IEC 61000-6-1,EN-IEC 61000-6-3 |
| Automotive Directive | ECE R10-4,EN 50498 |
| Cable Connection | |
| Type and size | 63a din mount breaker or fused disconnect |
| Size mm2 | 0 - 1.5m between inverter and battery = 4mm square cable. 1.5 - 3m use 6mm square cable |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |
 (1)-54x54.jpg)
