The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT -Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device
The integrated GX device includes:
• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
• A USB port
• An Ethernet port
• A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
The manual is available here:
https://www.victronenergy.com/media/pg/EasySolar-II_GX/en/index-en.html
The datasheet is available here:
| Victron Specifications | |
| Battery Voltage Nominal | 24 V |
| Power Control | 1 |
| Power Assist | 1 |
| Transfer Switch Current Rating | 32 A |
| Max Ac Input Current | 32 A |
| Aux Ac Current | 32 A |
| DC Input Voltage Range | [19, 33] VDC |
| AC Output Voltage | 230 VAC |
| AC Output Frequency | 50 Hz |
| Cont Power VA25 | 3,000 VA |
| Cont Power W25 | 2,400 W |
| Cont Power W40 | 2,200 W |
| Cont Power W55 | 1,700 W |
| Peak Power Rating | 5,500 W |
| Max App Feedin Power | 3,000 VA |
| Max Efficiency | 94 % |
| Zero Load Power | 13 W |
| Zero Load Power AES | 9 W |
| Zero Load Power Search | 3 W |
| AC Input Voltage Range | [187, 265] VAC |
| AC Input Frequency Range | [45, 65] Hz |
| Charge Voltage Absorption | 28.8 VDC |
| Charge Voltage Float | 27.6 VDC |
| Charge Voltage Storage | 26.4 VDC |
| Charge Algorithm | Adaptive, 4-stage |
| Maximum Battery Charge Current | 70 A |
| Temperature Sensor | Included |
| Solar Charger Model | MPPT 250/70-Tr |
| Max Output Current Solar | 70 A |
| Max Pv Power | 2,000 W |
| Max Pv Open Circuit Voltage | 250 V |
| Maxi Efficiency Solar Charger | 99 % |
| Self Consumption | 20 mA |
| Charge Voltage Absorption1 | 28.8 VDC |
| Charge Voltage Float1 | 46.4 VDC |
| Charge Algorithm1 | Adaptive, 4-stage |
| Auxiliary Output | 1 |
| External Ac Current Sensor | 50A or 100A (optional) |
| Programmable Relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Communication Port | VE.Direct,VE.Bus,VE.Can,BMS-Can,WiFi,Ethernet |
| Remote Terminal | On / Off |
| Computer Programming | 1 |
| Fan Assist Cooling | 1 |
| Max Humidity | 95 % |
| Max Altitude | 2,000 m |
| Battery Connection Terminal Type | M8 bolts |
| PV Connection Terminal Type | M6 bolts |
| Remote Terminal Type | Screw terminal two pole |
| Relay Terminal | Screw terminal 3-pole |
| Vebus Terminal Type | Two RJ45 terminals |
| Material | Aluminium |
| Colour | Blue (RAL 5012) |
| Protection Category | IP21 |
| Weight | 26 kg |
| Height | 499 mm |
| Width | 268 mm |
| Depth | 237 mm |
| Safety | EN-IEC 60335-1,EN-IEC 60335-2-29,EN-IEC 62109-1,EN-IEC 62109-2 |
| Emission Immunity | EN 55014-1,EN 55014-2,EN-IEC 61000-3-2,EN-IEC 61000-3-3,EN-IEC 61000-6-1, EN-IEC 61000-6-2,EN-IEC 61000-6-3 |
| Anti Islanding Standard | See our website |
| Charge Controller | |
| Max VOC | 250 |
| Amps | 70 |
| Voltage | 24 |
| Cable Connection | |
| Type and size | 300A fuse (250A NH1 Fuse, 250VDC For NH1 Disconnect also acceptable as is the 315a although slightly overspecced) |
| Size mm2 | 0-5m = 50mm2 5-10m = 95mm2 PV INPUT M6 BOLTS Battery connection M8 bolts |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |