The all-in-one solar power solution

The Victron EasySolar-II GX integrates the following elements:

• A MultiPlus-II inverter/charger

• A SmartSolar MPPT -Tr solar charge controller

• A GX device with a 2 x 16-character display.

These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device

The integrated GX device includes:

• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.

• A USB port

• An Ethernet port

• A VE.Direct port

The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.

The manual is available here:

https://www.victronenergy.com/media/pg/EasySolar-II_GX/en/index-en.html

The datasheet is available here:

https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-24V-48V-3kVA-48V-5kVA-MPPT-250-70-100-GX-EN.pdf

High-capacity 24V power engineered with the enhanced accuracy and efficiency of the Drift Gen2.

The Fogstar Drift Gen2 24V 300Ah LiFePO4 Battery is designed for 24V systems that need strong, stable and long-lasting energy storage. With refined monitoring hardware, improved internal engineering and dependable power delivery, it delivers reliable performance in campervans, marine environments, off-grid cabins and 24V solar setups.

Key Features

• 300A Smart BMS for High-Demand Systems:
  The next-generation 300A Battery Management System handles heavy loads with ease. Perfect for powerful inverter setups and demanding off-grid applications.
• 0.2A Shunt Accuracy:
  Drift Gen2 delivers highly accurate power monitoring, giving you tighter state-of-charge readings and more reliable system performance.
• Active Cell Balancer for Maximum Efficiency:
  A built-in active balancer keeps every cell perfectly aligned. This boosts efficiency, improves cycle life and maintains consistent output.
• Premium EVE Prismatic Cells:
  Built with Grade A LF304 EVE cells that deliver consistent performance, solid stability, strong safety and a long service life.
• Full Victron Plug-and-Play Integration:
  Drift Gen2 communicates cleanly with Victron systems for faster installation and more accurate system data.
• IP67 Waterproof and Dustproof:
  Fully sealed against water and dust. Ideal for marine installations, damp lockers and rugged environments.
• Bluetooth Monitoring via the Fogstar App:
  Track real-time voltage, current, SOC, temperature and more using the Fogstar Drift App for iOS and Android.
• Automatic Low-Temperature Heating:
  The built-in heater automatically warms the battery to a safe temperature before charging, protecting the cells in cold weather.
• Improved Hardware and Design:
  A custom lid, upgraded terminals and a physical on/off switch make installs cleaner and maintenance easier.
• Designed & Supported in the UK:
  Created by our award-winning engineering team with full UK-based technical support. Backed by a 10-year warranty.

Technical Specifications

• Energy: 7,680Wh
• Capacity: 300Ah
• Voltage: 25.6V LiFePO4
• Cycle Life: 4500 Cycles (80% DOD)
• Recommended Charge Voltage: 28.4V
• Max Continuous Discharge: 300A
• Cell Type: EVE Grade A LF304
• BMS: 300A Smart BMS with 0.2A shunt accuracy and active balancing
• Monitoring: Bluetooth via Fogstar Drift App
• Heating: Integrated low-temp heating
• IP Rating: IP67
• Dimensions: 635 (L) x 244 (W) x 220 (H)
• Weight: Approx 52Kg
• Terminals: M8 - 1.25 pitch - 12mm (bolts included).

System Configuration Options

• Connect up to 2 batteries in series for 48V systems
• Connect up to 16 batteries in parallel to increase total capacity

Learn more about TCL-Solar - Click above

TCL Solar E-class, a premium solar module designed with back-contact cell architecture for a sleek, all-black aesthetic. This design not only enhances the visual appeal of rooftops—especially important in Britain's architecturally sensitive environments—but also boosts energy efficiency by maximising light absorption. SunPower panels complement this offering with their renowned reliability and long-term performance, making them a top-tier choice for residential and commercial installations.  These modules are ideal for customers who value design as much as performance.

HSM-BD54-DA460

Learn more about E-Class TCL-Solar Modules - Click below

The Smart Battery Shunt

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

This unit has M10 bolts.

Victron MK3-USB Configuration Interface

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates using the Victron VE Configure software

Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and other Inverters with a VE.Bus communication port.

Counsider purchasing a Cat 5 ethernet cable to go with this product if you don't already have one. You won't be able to connect the MK3 interface to an inverter product without an ethernet cable.

Supported Platforms

The VEConfigure tools are only available for Windows. For Mac, there is a (not officially supported) work around available.

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 15m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

Kraus & Naimer DC Switch

Switch - Disconnectors, 2 pole - for single string

•            IP66/67 Protection

•            Black/Grey Padlockable Handle – lockable in the OFF-position

•            Class II compliant, Grey Insulated Enclosure

•            Switch Interlocked with lid to prevent opening in “ON” position

•            Rated for use in ambient temperatures of 50°C

Plastic Enclosures, Protection IP66/67, totally insulated, M20/M25 knock-outs
Handle black, Plate Backing grey
Contact development: 2 pole, 6 contacts per circuit (2 x 3 in series)
Dimensions (w x h x d): 100mm x 178mm X 93mm

50mm² cable per meter, Class 6 multi-stranded extra flexible tinned copper conductor, 285A rated for 5mins @ 100% Duty cycle

Conductor diameter 8mm, Overall diameter including sheath 13.5mm

Why Orange?  Why no Red & Black options...

We only sell loose orange weld cable which is better than the red or black alternatives. It's top quality tinned copper cable, you need to accept the colour of the sheath or heat shrink over it. The benefits of tinned copper is better conductivity and much great corrosion resistance for marine and mobile applications.

In addition, our battery cables are manufactured in accordance with BS 638 Part 4 & EN 50525-2-81. It has a rubber compound to achieve the 85deg temp rating to meet all the requirements of EM5, that allows the cable to achieve the increased current carrying capacity.

Inferior cable has PVC instead of rubber and can only achieve a 70deg temp rating, which suggest a reduced current carrying capacity and inability to meet EM5 standards.

300A Battery isolator switch, 900A for 30 secs, up to 48 Volt, M10 connection. Can be use on 12, 24 or 48 Volt system as long as switch current rating is not exceeded.

**Please note: as per the image, the switch does not come with hardware to fix the 2 sections together, and this must be purchased separately, depending on type of installation (surface mount, panel mount, etc)**

BLUE SEA M-SERIES SELECTOR SWITCHES

M-SERIES BATTERY SWITCHES

300 Ampere continuous rating.

• Tin-plated copper studs for maximum conductivity and corrosion resistance
• Studs accept 3⁄8" (M10) ring terminals
• 7⁄8" (22mm) stud length accepts multiple cable terminals
• One-piece terminal stud design never loosens over time
• Case design allows surface or rear panel mounting options
• Label with international legends
• Tactile indicator conveys knob position by feel

Regulatory

• CE marked, ISO 8846
• UL Listed - UL 1107 electric power switches
• Meets ABYC requirements
• Meets UL1500 and SAE J1171 external ignition protection requirements
• IP66 protects against powerful water jets

BLUE SEA SYSTEMS 5191 SINGLE 300A MRBF MARINE RATED BATTERY FUSE TERMINAL FUSE BLOCK WITH INSULATING COVER.

Fuses are sold separately. See related products tab for details.

The MRBF fuses are suitable for interupting the following short-circuit currents, and are therefore suitable for many lithium batteries:

10,000A @14V DC
5,000A @ 32V DC
2,000A @ 58V DC

The MRBF fuse holder has an M10 hole for bolting to the battery post, and an M8 stud for connection to the load side of the fuse. See the images for further details.

BLUE SEA SYSTEMS 250A MRBF MARINE RATED BATTERY FUSE

Fuse holders are sold separately. See the related products tab.

The MRBF fuses are suitable for interupting the following short-circuit currents, and are therefore suitable for many lithium batteries:

10,000A @14V DC
5,000A @ 32V DC
2,000A @ 58V DC

The SE7 side-entry twin cable gland is the perfect solution when space is limited or when loops from conventional top entry glands are not appropriate.

Available in various finishes, (but only in black with us) the entire SE series of glands are tested achieving the IP68 rating which ensures a perfect waterproof solution for various cable management applications.  

Each unit is supplied with A4 stainless steel fixings. Suitable for two cables 3 – 6mm diameter supplied with tapered seals which ensure that the hole closes completely, creating a watertight seal around the cable.

Ideal for electrical cabling applications and ducting through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations.

Waterproof / dustproof (to IP68) gland with parallel low profile cable entry. Cable Size: 2 x 3mm – 2 x 6mm (3 pre-moulded bungs, no drilling required)

Designed for the Marine industry – IP68 for all applications

The VE.Direct cable is used for comunication between Victron VE Direct devices. For example it can be used to connect a Victron battery monitor to the Victron Colour Control or to connect a Victron GlobalLink 520 to a Victron MPPT Controller that has a VE direct port.

M8 male to M10 male thread adapter in stainless steel. Useful to change size of thread for battery posts that have threaded inserts.

M8 thread is 10mm long, M10 thread is 15mm long. (Product image for reference only - THIS LISTING IS FOR 1 ADAPTOR)