INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES. NOTE - YOU CANNOT MIX BATTERY TYPES.
Sunsynk’s top-grade 5.32kWh Lithium-Ion Phosphate batteries (4.79kWh usable) have been engineered to the highest standard.
They are capable of up to 90% depth of discharge and scalable with up to 32 units in parallel, allowing for a maximum of 170kWh per inverter.
Sunsynk BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward.
The battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. This allows the end user to utilise the full potential of our inverter and battery systems.
**These batteries are supplied with medium length cables for parallel connections between batteries, as well as long length cables for battery to inverter connections.**
WARNING NOTE - You cannot mix Sunsynk G5.3, BYD, CATL, IP20 or IP65 batteries in the same system.
Availability: In stock - Delivery 1-3 days or collect from near Lewes
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;
Dual MPPT design
Compatible with Lithium-ion batteries and Lead Acid batteries
Up to 50kWh battery pack
5yr warranty as standard
IP65 rated
Anti-islanding protection
Fully programmable power export
Automatic switching from Grid-Tied to Off-Grid mode
Up to 16 units with the same firmware can be paralleled
Adding a Sunsynk battery to your existing inverter will extend the inverter warranty to 10 years. This must be done within 3 months of the original installation for eligibility. If done later than this, the battery will be registered separately at 10 years, and the inverter maintains a 5 year warranty.
Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.
SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.
The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.
NH00 rated at 250VDC, 160A,
Choose NH00 or NH000 fuses separately
Product measures 170mm H X 84mm W X 80mm D. Surface mountable.
Availability: In stock - Delivery 1-3 days or collect from near Lewes
SEE DOWLOADS FOR DETAILS
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.
 (1)-54x54.jpg)
