The 3.0kW rated power of the Solis RHI 3.0 when matched with two Pylon batteries, delivers up to 2.4kW of discharge power. That's perfect for supplying some of the electrical loads in the evening.
Solis Hybrid products have a separate AC output for essential loads, so they can offer protection for certain important appliances in the event of a power cut.
Solis Hybrid inverter comes with an energy meter and communication interface built in. The Cat5e cable for connecting the inverter to the battery and a longer length for connecting the Energy Meter to the inverter are both included. We can also supply longer lengths of Cat5e cable, should your particular site require them.
Availability: In stock - Delivery 1-3 days or collect from near Lewes
The US2000C is a 48V battery storage system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety, value and most promising life cycle. A self designed BMS protects the cell from abormal temperature, current, voltage, SoC and SoH.
The Pylontech US2000C has an incredible DoD of 95%
Vertical industry integration ensures cycle life of 6000 cycles
Compact and fashionable design fits in your home environment
Deliver up to 2.4kW* with single module (2.4KWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.2kW per battery
Modular design gives customers the power of choice of capacity
Compatible with large number of Hybrid inverters
Simple buckle fixing minimise the installation time and cost
Provides pre-charge function to protect ESS system from surge current.
The US2000C can be used to expand an existing US2000 bank. Please note, the US2000C needs to be used as the master battery when used to expand an existing US2000 bank.
MAX DISCHARGE AND CHARGE RATE IS ONLY APPLICABLE FOR +- 60 SECONDS The maximum allowed voltage is 53.5V, please ensure that you check the inverter settings are below this BEFORE plugging in the UTILITY/SOLAR to the inverter.
If you want to use these batteries with Victron equipment please read this article to select the correct equipment:
Availability: In Stock - Delivery 2-5 days or collect from Lewes
Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.
NB: This product is not suitable for use with Lead acid/Lead carbon batteries and although supported, will not be covered under the European warranty. The Solis inverter is not able to accurately monitor the state of charge for lead acid batteries.
Fanless design IP65
High charge and discharge efficiency
Multiple work modes resulting in max self-consumption
Availability: In stock - Delivery 1-2 days depending on location or collect from nr Lewes
Pylon battery cable accessory kit for use with all the different battery models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the inverter/charger.
Please check the number of cable packs you need, according to your inverter/charge specifications. Each cable pack is rated at 100A continuous, and 125A peak.
This cable pack includes the following cables:
2 x 2m long power cables (1x positive and 1x negative) The cables are 25mm² and have an M8 eyelet on one end of each cable.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
One pole fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or charge controller and battery. Integrated handle enabling use as an isolator.