The Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications, for example, at the distribution box or to measure the output of a PV Inverter, AC Genset or the output of an inverter and inverter/charger.
The meter is supplied with CT clamps which have an internal diameter of 10mm. Please ensure your meter tails are able to pass through the clamps, or make provisions for downsizing the tails appropriately.
| Victron Specifications | |
| Voltage Connection | Direct |
| Input Voltage Range LN | [85, 265] V |
| Input Voltage Range LL | [150, 460] V |
| Frequency Select | 50Hz or 60Hz |
| Current Connection | Via current transformers (included - wire length 640 mm) |
| Rated Current | 75 A |
| Ve Can Port | Two RJ45 connectors (VE.Can terminators included) |
| Ethernet Port | One RJ45 connector, Modbus UDP |
| Refresh Rate | 100 ms |
| Power Type | Self-power supply via L1-N |
| Consumption W | 1.45 W |
| Consumption VA | 3.1 VA |
| Frequency | 50Hz or 60Hz |
| Current Transformer Connection Terminal | Pluggable screw terminals (included) |
| Material | polycarbonate |
| Colour | Blue (RAL 5012) |
| Protection Category | IP20 |
| Weight | 0.37 kg |
| Height | 90 mm |
| Width | 71 mm |
| Depth | 59 mm |
| Indoor Outdoor Usage | Indoor only |
| Max Humidity | 90 % |
| Altitude | 2,000 m |
| Overvoltage Category | Cat.III |
| Pollution Degree | 2 |
| Safety | EN-IEC 61010-1 |
| Manufacturer Warranty | |
| Standard Warranty: | 5 years (5 years extension to 10 years for additional 10% fee - contact us for a quote) |
| Warranty Exceptions: | Lead acid batteries 2 years Lithium batteries 3 years |